Nokia e51 SIP Settings for voip setup

Now you can enjoy crystal-clear phone calls over the Internet using the new Nokia e51 phones. If you have access to a WiFi or 3G connection, you can save money by using the Internet to connect your call instead of using your mobile phone minutes. No roaming or out-of-network fees. Make your calls from anywhere in the world to anywhere for just a few pennies a minute. Simple to configure, inexpensive to use.

Click here to learn more about mobile voip services.

Configuration Guide

Below you can find Nokia e51 SIP settings for voip setup configuration guide with Cybertel service.

STEP 1

Go to Tools / Settings / Connection / SIP settings. Create the following profile

Profile Name: Cybertel Service

Profile: IETF Default

Access point: (your WLAN AP name)

Public user name: 5551231234@2cybertel.com:5060 ( Instead of 5551231234 account number example, use the account number assigned to you when signed up for Cybertel service. When recorded your phone will show sip:5551231234@2cybertel.com:5060 )

Use Compression: No

Registration: Always on

Use Security: No

STEP 2

You do not need to enter Proxy Server settings

Proxy Server Address: none

Registrar Server:none

Realm: none

User Name: none

STEP 3

Enter the following for Registrar Server settings

Registrar Server: 2cybertel.com:5060 (When recorded your phone will show sip:2cybertel.com:5060)

Realm: 2cybertel.com:5060

User Name: 5551231234 (Instead of 5551231234 account number example, use the account number assigned to you when signed up for Cybertel service. )

Password: Enter the password that you chose when you signed up for the service.

Transport Type: UDP

Port: 5060

STEP 4

Go to connection / Internet Tel. Settings

Create a new profile for cybertel(555123xxxx), name it cybertel

In Connectivity / Internet tel. / Preferred profile

Choose cybertel

STEP 5

Reboot your phone. Once your phone is back on it will automatically register to Cybertel.

Once it is registered you can start making calls.

Default call type: To switch between normal GSM calls or VOIP calls, navigate to Tools / Settings / Call / Default call type. Select Cellular to make normal calls to the phone number or Internet to use VoIP to call the number or address

Make Calls!

To dial any phone number that is part of the NANP (North American Numbering Plan), you must dial:

1 + Area Code + Phone number

To dial any phone number that is outside of the NANP (North American Numbering Plan), you must dial:

Country Code + City Code + Phone number

For example if you want to call Brazil (country code 55) phone number in Rio de Janeiro (city code 21) you must dial 5521 and phone number. + sign can also be used and number can be dialed as +5521xxxxxxx

Problems? Please click here for our voip troubleshooter.

Nokia e60 SIP Settings for voip setup

Now you can enjoy crystal-clear phone calls over the Internet using the new Nokia e60 phones. If you have access to a WiFi or 3G connection, you can save money by using the Internet to connect your call instead of using your mobile phone minutes. No roaming or out-of-network fees. Make your calls from anywhere in the world to anywhere for just a few pennies a minute. Simple to configure, inexpensive to use.

Click here to learn more about mobile voip services.

Configuration Guide

Below you can find Nokia e60 SIP settings for voip setup configuration guide with Cybertel service.

STEP 1

Go to Tools / Settings / Connection / SIP settings. Create the following profile

Profile Name: Cybertel Service

Profile: IETF Default

Access point: (your WLAN AP name)

Use Compression: No

Registration: Always on

Use Security: No

STEP 2

You do not need to enter Proxy Server settings

Proxy Server Address: none

Registrar Server:none

Realm: none

User Name: none

STEP 3

Enter the following for Registrar Server settings

Registrar Server: 2cybertel.com:5060 (When recorded your phone will show sip:2cybertel.com:5060)

Realm: 2cybertel.com:5060

User Name: 5551231234 (Instead of 5551231234 account number example, use the account number assigned to you when signed up for Cybertel service. )

Password: Enter the password that you chose when you signed up for the service.

Transport Type: UDP

Port: 5060

STEP 4

Go to connection / Internet Tel. Settings

Create a new profile for cybertel(555123xxxx), name it cybertel

In Connectivity / Internet tel. / Preferred profile

Choose cybertel

STEP 5

Reboot your phone. Once your phone is back on it will automatically register to Cybertel.

Once it is registered you can start making calls.

Make Calls!

To dial any phone number that is part of the NANP (North American Numbering Plan), you must dial:

1 + Area Code + Phone number

To dial any phone number that is outside of the NANP (North American Numbering Plan), you must dial:

Country Code + City Code + Phone number

Problems? Please click here for our voip troubleshooter.

Nokia e61 SIP Settings for voip setup

Now you can enjoy crystal-clear phone calls over the Internet using the new Nokia e61 phones. If you have access to a WiFi or 3G connection, you can save money by using the Internet to connect your call instead of using your mobile phone minutes. No roaming or out-of-network fees. Make your calls from anywhere in the world to anywhere for just a few pennies a minute. Simple to configure, inexpensive to use.

Click here to learn more about mobile voip services.

Configuration Guide

BEFORE YOU BEGIN, please note the following:

On the Nokia E61, you will need firmware version 2.0618.06.05 or later. To check the firmware version installed on your handset, press %#0000#.

You can use Nokia firmware upgrade software at http://www.nokia.co.uk/softwareupdate/

You will need your USB cable and you must remember to set the profile to ’General’ before you start and ensure that there is a SIM card in place.

Always take a backup first to be on the safe side

Here you can find Nokia e61 SIP settings for voip setup configuration guide with Cybertel service.

STEP 1

Go to Tools / Settings / Connection / SIP settings. Create the following profile

Profile Name: Cybertel Service

Profile: IETF Default

Access point: (your WLAN AP name)

Use Compression: No

Registration: Always on

Use Security: No

STEP 2

You do not need to enter Proxy Server settings

Proxy Server Address: none

Registrar Server:none

Realm: none

User Name: none

STEP 3

Enter the following for Registrar Server settings

Registrar Server: 2cybertel.com:5060 (When recorded your phone will show sip:2cybertel.com:5060)

Realm: 2cybertel.com:5060

User Name: 5551231234 (Instead of 5551231234 account number example, use the account number assigned to you when signed up for Cybertel service. )

Password: Enter the password that you chose when you signed up for the service.

Transport Type: UDP

Port: 5060

STEP 4

Go to connection / Internet Tel. Settings

Create a new profile for cybertel(555123xxxx), name it cybertel

In Connectivity / Internet tel. / Preferred profile

Choose cybertel

STEP 5

Reboot your phone. Once your phone is back on it will automatically register to Cybertel.

Once it is registered you can start making calls.

Make Calls!

To dial any phone number that is part of the NANP (North American Numbering Plan), you must dial:

1 + Area Code + Phone number

To dial any phone number that is outside of the NANP (North American Numbering Plan), you must dial:

Country Code + City Code + Phone number

Nokia e61i SIP Settings for voip setup

Now you can enjoy crystal-clear phone calls over the Internet using the new Nokia e61i phones. If you have access to a WiFi or 3G connection, you can save money by using the Internet to connect your call instead of using your mobile phone minutes. No roaming or out-of-network fees. Make your calls from anywhere in the world to anywhere for just a few pennies a minute. Simple to configure, inexpensive to use.

Click here to learn more about mobile voip services.

STEP 1

Go to Tools / Settings / Connection / SIP settings. Create the following profile

Profile Name: Cybertel Service

Profile: IETF Default

Access point: (your WLAN AP name)

Use Compression: No

Registration: Always on

Use Security: No

STEP 2

You do not need to enter Proxy Server settings

Proxy Server Address: none

Registrar Server:none

Realm: none

User Name: none

STEP 3

Enter the following for Registrar Server settings

Registrar Server: 2cybertel.com:5060 (When recorded your phone will show sip:2cybertel.com:5060)

Realm: 2cybertel.com:5060

User Name: 5551231234 (Instead of 5551231234 account number example, use the account number assigned to you when signed up for Cybertel service. )

Password: Enter the password that you chose when you signed up for the service.

Transport Type: UDP

Port: 5060

STEP 4

Go to connection / Internet Tel. Settings

Create a new profile for cybertel(555123xxxx), name it cybertel

In Connectivity / Internet tel. / Preferred profile

Choose cybertel

STEP 5

Reboot your phone. Once your phone is back on it will automatically register to Cybertel.

Once it is registered you can start making calls.

Make Calls!

To dial any phone number that is part of the NANP (North American Numbering Plan), you must dial:

1 + Area Code + Phone number

To dial any phone number that is outside of the NANP (North American Numbering Plan), you must dial:

Country Code + City Code + Phone number

Problems? Please click here for our voip troubleshooter.

Nokia E62 SIP Settings for voip setup

Now you can enjoy crystal-clear phone calls over the Internet using the new Nokia e62 phones. If you have access to a WiFi or 3G connection, you can save money by using the Internet to connect your call instead of using your mobile phone minutes. No roaming or out-of-network fees. Make your calls from anywhere in the world to anywhere for just a few pennies a minute. Simple to configure, inexpensive to use.

Click here to learn more about mobile voip services.

Configuration Guide

Here you can find Nokia e62 SIP settings for voip setup configuration guide with Cybertel service.

STEP 1

Go to Tools / Settings / Connection / SIP settings. Create the following profile

Profile Name: Cybertel Service

Profile: IETF Default

Access point: (your WLAN AP name)

Use Compression: No

Registration: Always on

Use Security: No

STEP 2

You do not need to enter Proxy Server settings

Proxy Server Address: none

Registrar Server:none

Realm: none

User Name: none

STEP 3

Enter the following for Registrar Server settings

Registrar Server: 2cybertel.com:5060 (When recorded your phone will show sip:2cybertel.com:5060)

Realm: 2cybertel.com:5060

User Name: 5551231234 (Instead of 5551231234 account number example, use the account number assigned to you when signed up for Cybertel service. )

Password: Enter the password that you chose when you signed up for the service.

Transport Type: UDP

Port: 5060

STEP 4

Go to connection / Internet Tel. Settings

Create a new profile for cybertel(555123xxxx), name it cybertel

In Connectivity / Internet tel. / Preferred profile

Choose cybertel

STEP 5

Reboot your phone. Once your phone is back on it will automatically register to Cybertel.

Once it is registered you can start making calls.

Make Calls!

To dial any phone number that is part of the NANP (North American Numbering Plan), you must dial:

1 + Area Code + Phone number

To dial any phone number that is outside of the NANP (North American Numbering Plan), you must dial:

Country Code + City Code + Phone number

Problems? Please click here for our voip troubleshooter.

Nokia e65 SIP Settings for voip setup

Now you can enjoy crystal-clear phone calls over the Internet using the new Nokia e65 phones. If you have access to a WiFi or 3G connection, you can save money by using the Internet to connect your call instead of using your mobile phone minutes. No roaming or out-of-network fees. Make your calls from anywhere in the world to anywhere for just a few pennies a minute. Simple to configure, inexpensive to use.

Click here to learn more about mobile voip services.

STEP 1

Go to Tools / Settings / Connection / SIP settings. Create the following profile

Profile Name: Cybertel Service

Profile: IETF Default

Access point: (your WLAN AP name)

Use Compression: No

Registration: Always on

Use Security: No

STEP 2

You do not need to enter Proxy Server settings

Proxy Server Address: none

Registrar Server:none

Realm: none

User Name: none

STEP 3

Enter the following for Registrar Server settings

Registrar Server: 2cybertel.com:5060 (When recorded your phone will show sip:2cybertel.com:5060)

Realm: 2cybertel.com:5060

User Name: 5551231234 (Instead of 5551231234 account number example, use the account number assigned to you when signed up for 2cybertel service. )

Password: Enter the password that you chose when you signed up for the service.

Transport Type: UDP

Port: 5060

STEP 4

Go to connection / Internet Tel. Settings

Create a new profile for 2cybertel(555123xxxx), name it 2cybertel

In Connectivity / Internet tel. / Preferred profile

Choose 2cybertel

STEP 5

Reboot your phone. Once your phone is back on it will automatically register to 2cybertel.

Once it is registered you can start making calls.

Make Calls!

To dial any phone number that is part of the NANP (North American Numbering Plan), you must dial:

1 + Area Code + Phone number

To dial any phone number that is outside of the NANP (North American Numbering Plan), you must dial:

Country Code + City Code + Phone number

Problems? Please click here for our voip troubleshooter.

Nokia e70 SIP Settings for voip setup

Now you can enjoy crystal-clear phone calls over the Internet using the new Nokia e70 phones. If you have access to a WiFi or 3G connection, you can save money by using the Internet to connect your call instead of using your mobile phone minutes. No roaming or out-of-network fees. Make your calls from anywhere in the world to anywhere for just a few pennies a minute. Simple to configure, inexpensive to use.

Click here to learn more about mobile voip services.

Configuration Guide

BEFORE YOU BEGIN, please note the following:

On the E70, you will need firmware version 2.0618.07.10 31-08-06 RM10 (RM24 in the US). To check the firmware version installed on your handset, press %#0000#.

You can use Nokia firmware upgrade software at http://www.nokia.co.uk/softwareupdate/

You will need your USB cable and you must remember to set the profile to ’General’ before you start and ensure that there is a SIM card in place.

Always take a backup first to be on the safe side

Here you can find Nokia e61 SIP settings for voip setup configuration guide with 2cybertel service.

STEP 1

Go to Tools / Settings / Connection / SIP settings. Create the following profile

Profile Name: 2cybertel Service

Profile: IETF Default

Access point: (your WLAN AP name)

Public user name: 5551231234@2cybertel.com:5060 ( Instead of 5551231234 account number example, use the account number assigned to you when signed up for 2cybertel service. When recorded your phone will show sip:5551231234@2cybertel.com:5060 )

Use Compression: No

Registration: Always on

Use Security: No

STEP 2

You do not need to enter Proxy Server settings

Proxy Server Address: none

Registrar Server:none

Realm: none

User Name: none

STEP 3

Enter the following for Registrar Server settings

Registrar Server: 2cybertel.com:5060 (When recorded your phone will show sip:2cybertel.com:5060)

Realm: 2cybertel.com:5060

User Name: 5551231234 (Instead of 5551231234 account number example, use the account number assigned to you when signed up for 2cybertel service. )

Password: Enter the password that you chose when you signed up for the service.

Transport Type: UDP

Port: 5060

STEP 4

Go to connection / Internet Tel. Settings

Create a new profile for 2cybertel(555123xxxx), name it 2cybertel

In Connectivity / Internet tel. / Preferred profile

Choose 2cybertel

STEP 5

Reboot your phone. Once your phone is back on it will automatically register to 2cybertel.

Once it is registered you can start making calls.

Make Calls!

To dial any phone number that is part of the NANP (North American Numbering Plan), you must dial:

1 + Area Code + Phone number

To dial any phone number that is outside of the NANP (North American Numbering Plan), you must dial:

Country Code + City Code + Phone number

Problems? Please click here for our voip troubleshooter.

Nokia e90 SIP Settings for voip setup

Now you can enjoy crystal-clear phone calls over the Internet using the new Nokia e90 phones. If you have access to a WiFi or 3G connection, you can save money by using the Internet to connect your call instead of using your mobile phone minutes. No roaming or out-of-network fees. Make your calls from anywhere in the world to anywhere for just a few pennies a minute. Simple to configure, inexpensive to use.

Click here to learn more about mobile voip services.

STEP 1

Go to Tools / Settings / Connection / SIP settings. Create the following profile

Profile Name: 2cybertel Service

Profile: IETF Default

Access point: (your WLAN AP name)

Use Compression: No

Registration: Always on

Use Security: No

STEP 2

You do not need to enter Proxy Server settings

Proxy Server Address: none

Registrar Server:none

Realm: none

User Name: none

STEP 3

Enter the following for Registrar Server settings

Registrar Server: 2cybertel.com:5060 (When recorded your phone will show sip:2cybertel.com:5060)

Realm: 2cybertel.com:5060

User Name: 5551231234 (Instead of 5551231234 account number example, use the account number assigned to you when signed up for 2cybertel service. )

Password: Enter the password that you chose when you signed up for the service.

Transport Type: UDP

Port: 5060

STEP 4

Go to connection / Internet Tel. Settings

Create a new profile for 2cybertel(555123xxxx), name it 2cybertel

In Connectivity / Internet tel. / Preferred profile

Choose 2cybertel

STEP 5

Reboot your phone. Once your phone is back on it will automatically register to 2cybertel.

Once it is registered you can start making calls.

Make Calls!

To dial any phone number that is part of the NANP (North American Numbering Plan), you must dial:

1 + Area Code + Phone number

To dial any phone number that is outside of the NANP (North American Numbering Plan), you must dial:

Country Code + City Code + Phone number

Problems? Please click here for our voip troubleshooter.

Nokia N80 VoIP SIP settings

Now you can enjoy crystal-clear phone calls over the Internet using the new Nokia N80 phones. If you have access to a WiFi or 3G connection, you can save money by using the Internet to connect your call instead of using your mobile phone minutes. No roaming or out-of-network fees. Make your calls from anywhere in the world to anywhere for just a few pennies a minute. Simple to configure, inexpensive to use.

Click here to learn more about mobile voip services.

Configuration Guide

BEFORE YOU BEGIN, please note the following:

On the N80 Internet Edition (N80ie) you will need firmware 4.0632.0.38 or later. To check the firmware version installed on your handset, press %#0000#.

You can use Nokia firmware upgrade software at http://www.nokia.co.uk/softwareupdate/

You will need your USB cable and you must remember to set the profile to ’General’ before you start and ensure that there is a SIM card in place.

Always take a backup first to be on the safe side!

STEP 1

Go to Tools / Settings / Connection / SIP settings. Create the following profile

Profile Name: 2cybertel Service

Profile: IETF Default

Access point: (your WLAN AP name)

Use Compression: No

Registration: Always on

Use Security: No

STEP 2

You do not need to enter Proxy Server settings

Proxy Server Address: none

Registrar Server:none

Realm: none

User Name: none

STEP 3

Enter the following for Registrar Server settings

Registrar Server: 2cybertel.com:5060 (When recorded your phone will show sip:5551231234@2cybertel.com:5060)

Realm: 2cybertel.com:5060

User Name: 5551231234 (Instead of 5551231234 account number example, use the account number assigned to you when signed up for 2cybertel service. )

Password: Enter the password that you chose when you signed up for the service.

Transport Type: UDP

Port: 5060

STEP 4

Go to connection / Internet Tel. Settings

Create a new profile for 2cybertel(555123xxxx), name it 2cybertel

In Connectivity / Internet tel. / Preferred profile

Choose 2cybertel

STEP 5

Reboot your phone. Once your phone is back on it will automatically register to 2cybertel.

Once it is registered you can start making calls.

Make Calls!

To dial any phone number that is part of the NANP (North American Numbering Plan), you must dial:

1 + Area Code + Phone number

To dial any phone number that is outside of the NANP (North American Numbering Plan), you must dial:

Country Code + City Code + Phone number

Problems? Please click here for our voip troubleshooter.

Nokia N80ie SIP Settings for voip setup

Now you can enjoy crystal-clear phone calls over the Internet using the new Nokia N80ie phones. If you have access to a WiFi or 3G connection, you can save money by using the Internet to connect your call instead of using your mobile phone minutes. No roaming or out-of-network fees. Make your calls from anywhere in the world to anywhere for just a few pennies a minute. Simple to configure, inexpensive to use.

Click here to learn more about mobile voip services.

Configuration Guide

BEFORE YOU BEGIN, please note the following:

Here you can find Nokia N80ie SIP settings for voip setup configuration guide with 2cybertel service.

STEP 1

Go to Tools / Settings / Connection / SIP settings. Create the following profile

Profile Name: 2cybertel Service

Profile: IETF Default

Access point: (your WLAN AP name)

Use Compression: No

Registration: Always on

Use Security: No

STEP 2

You do not need to enter Proxy Server settings

Proxy Server Address: none

Registrar Server:none

Realm: none

User Name: none

STEP 3

Enter the following for Registrar Server settings

Registrar Server: 2cybertel.com:5060 (When recorded your phone will show sip:2cybertel.com:5060)

Realm: 2cybertel.com:5060

User Name: 5551231234 (Instead of 5551231234 account number example, use the account number assigned to you when signed up for 2cybertel service. )

Password: Enter the password that you chose when you signed up for the service.

Transport Type: UDP

Port: 5060

STEP 4

Go to connection / Internet Tel. Settings

Create a new profile for 2cybertel(555123xxxx), name it 2cybertel

In Connectivity / Internet tel. / Preferred profile

Choose 2cybertel

STEP 5

Reboot your phone. Once your phone is back on it will automatically register to 2cybertel.

Once it is registered you can start making calls.

Make Calls!

To dial any phone number that is part of the NANP (North American Numbering Plan), you must dial:

1 + Area Code + Phone number

To dial any phone number that is outside of the NANP (North American Numbering Plan), you must dial:

Country Code + City Code + Phone number

Problems? Please click here for our voip troubleshooter.

Nokia N81 SIP Settings for voip setup

Now you can enjoy crystal-clear phone calls over the Internet using the new Nokia N81 phones. If you have access to a WiFi or 3G connection, you can save money by using the Internet to connect your call instead of using your mobile phone minutes. No roaming or out-of-network fees. Make your calls from anywhere in the world to anywhere for just a few pennies a minute. Simple to configure, inexpensive to use.

Click here to learn more about mobile voip services.

Here you can find Nokia N81 SIP settings for voip setup configuration guide with 2cybertel service.

STEP 1

Go to Tools / Settings / Connection / SIP settings. Create the following profile

Profile Name: 2cybertel Service

Profile: IETF Default

Access point: (your WLAN AP name)

Use Compression: No

Registration: Always on

Use Security: No

STEP 2

You do not need to enter Proxy Server settings

Proxy Server Address: none

Registrar Server:none

Realm: none

User Name: none

STEP 3

Enter the following for Registrar Server settings

Registrar Server: 2cybertel.com:5060 (When recorded your phone will show sip:2cybertel.com:5060)

Realm: 2cybertel.com:5060

User Name: 5551231234 (Instead of 5551231234 account number example, use the account number assigned to you when signed up for 2cybertel service. )

Password: Enter the password that you chose when you signed up for the service.

Transport Type: UDP

Port: 5060

STEP 4

Go to Tools / Settings / Connection / Internet Tel. Settings

Create a new profile for 2cybertel(555123xxxx), name it 2cybertel

Choose 2cybertel as Preferred profile

STEP 5

Reboot your phone. Once your phone is back on it will automatically register to 2cybertel.

Once it is registered you can start making calls.

Make Calls!

To dial any phone number that is part of the NANP (North American Numbering Plan), you must dial:

1 + Area Code + Phone number

To dial any phone number that is outside of the NANP (North American Numbering Plan), you must dial:

Country Code + City Code + Phone number

Problems? Please click here for our voip troubleshooter.

Nokia N82 SIP Settings for voip setup

Now you can enjoy crystal-clear phone calls over the Internet using the new Nokia N82 phones. If you have access to a WiFi or 3G connection, you can save money by using the Internet to connect your call instead of using your mobile phone minutes. No roaming or out-of-network fees. Make your calls from anywhere in the world to anywhere for just a few pennies a minute. Simple to configure, inexpensive to use.

Click here to learn more about mobile voip services.

Here you can find Nokia N82 SIP settings for voip setup configuration guide with 2cybertel service.

STEP 1

Go to Tools / Settings / Connection / SIP settings. Create the following profile

Profile Name: 2cybertel Service

Profile: IETF Default

Access point: (your WLAN AP name)

Use Compression: No

Registration: Always on

Use Security: No

STEP 2

You do not need to enter Proxy Server settings

Proxy Server Address: none

Registrar Server:none

Realm: none

User Name: none

STEP 3

Enter the following for Registrar Server settings

Registrar Server: 2cybertel.com:5060 (When recorded your phone will show sip:2cybertel.com:5060)

Realm: 2cybertel.com:5060

User Name: 5551231234 (Instead of 5551231234 account number example, use the account number assigned to you when signed up for 2cybertel service. )

Password: Enter the password that you chose when you signed up for the service.

Transport Type: UDP

Port: 5060

STEP 4

Go to Tools / Settings / Connection / Internet Tel. Settings

Create a new profile for 2cybertel(555123xxxx), name it 2cybertel

Choose 2cybertel as Preferred profile

STEP 5

Reboot your phone. Once your phone is back on it will automatically register to 2cybertel.

Once it is registered you can start making calls.

Make Calls!

To dial any phone number that is part of the NANP (North American Numbering Plan), you must dial:

1 + Area Code + Phone number

To dial any phone number that is outside of the NANP (North American Numbering Plan), you must dial:

Country Code + City Code + Phone number

For example if you want to call Brazil (country code 55) phone number in Rio de Janeiro (city code 21) you must dial 5521 and phone number. + sign can also be used and number

Nokia N95 SIP Settings for voip setup

Now you can enjoy crystal-clear phone calls over the Internet using the new Nokia N95 phones. If you have access to a WiFi or 3G connection, you can save money by using the Internet to connect your call instead of using your mobile phone minutes. No roaming or out-of-network fees. Make your calls from anywhere in the world to anywhere for just a few pennies a minute. Simple to configure, inexpensive to use.

Click here to learn more about mobile voip services.

Here you can find Nokia N95 SIP settings for voip setup and SIP client configuration guide with Cybertel service.

STEP 1

Go to Tools / Settings / Connection / SIP settings. Create the following profile

Profile Name: Cybertel Service

Profile: IETF Default

Access point: (your WLAN AP name)

Use Compression: No

Registration: Always on

Use Security: No

STEP 2

You do not need to enter Proxy Server settings

Proxy Server Address: none

Registrar Server:none

Realm: none

User Name: none

STEP 3

Enter the following for Registrar Server settings

Registrar Server: 2cybertel.com:5060 (When recorded your phone will show sip:2cybertel.com:5060)

Realm: 2cybertel.com:5060

User Name: 5551231234 (Instead of 5551231234 account number example, use the account number assigned to you when signed up for Cybertel service. )

Password: Enter the password that you chose when you signed up for the service.

Transport Type: UDP

Port: 5060

STEP 4

Go to Tools / Settings / Connection / Internet Tel. Settings

Create a new profile for cybertel(555123xxxx), name it cybertel

Choose cybertel as Preferred profile

STEP 5

Reboot your phone. Once your phone is back on it will automatically register to Cybertel.

Once it is registered you can start making calls.

Make Calls!

To dial any phone number that is part of the NANP (North American Numbering Plan), you must dial:

1 + Area Code + Phone number

To dial any phone number that is outside of the NANP (North American Numbering Plan), you must dial:

Country Code + City Code + Phone number

For example if you want to call Brazil (country code 55) phone number in Rio de Janeiro (city code 21) you must dial 5521 and phone number. + sign can also be used and